How to add AISend's DNS records in Vercel

Vercel can be your DNS host only if the domain uses Vercel's nameservers, which is the first thing to check, because a domain that just points its website at Vercel keeps its records at the old provider. This guide adds the AISend records for mail.acme.com in the Vercel dashboard and with vercel dns add, and uses the check Vercel itself documents: asking its nameserver directly.

Provider statements checked on November 19, 2026 against the provider's own pages, linked as Sources.

What you will add

AISend is our product: a Resend-compatible email API that sends through Amazon SES. This page is written by the team that builds it, so the records below are the ones AISend really issues. Add a domain on the AISend Domains page first; it shows your three tokens.

Examples use mail.acme.com, a subdomain of acme.com. We recommend verifying a subdomain like this over the root domain; the setup overview and our count of 23 real domains explain why.

RecordTypeFull hostValueNeeded?
DKIM 1CNAME<token1>._domainkey.mail.acme.com<token1>.dkim.amazonses.comYes, gates verification
DKIM 2CNAME<token2>._domainkey.mail.acme.com<token2>.dkim.amazonses.comYes, gates verification
DKIM 3CNAME<token3>._domainkey.mail.acme.com<token3>.dkim.amazonses.comYes, gates verification
SPF (optional)TXTmail.acme.comv=spf1 include:amazonses.com ~allNo
DMARC (optional)TXT_dmarc.mail.acme.comv=DMARC1; p=none; rua=mailto:dmarc@mail.acme.comNo

Only the three DKIM CNAMEs gate verification. Replace each <tokenN> with the token the Domains page shows; never use a token from this page.

Does the domain use Vercel's nameservers?

Vercel applies DNS records, and lets you manage them, only for domains that use Vercel's nameservers. If you use another provider's nameservers, make these changes at that DNS provider instead. Source: Vercel Docs: Managing DNS Records, checked November 19, 2026.

Adding a domain to a Vercel project does not, by itself, move its DNS records or change its email configuration. Source: Vercel Docs: Managing DNS Records, checked November 19, 2026.

That is the Vercel version of our most common failure: a domain attached to a Vercel project whose DNS still lives at the registrar or at Cloudflare. Run the nameserver command in the terminal check, and only continue here if it names Vercel.

Add the records in Vercel

  • In your team's Vercel dashboard, open Domains in the sidebar and click the domain.
  • On the domain's Advanced Settings page use Enable Vercel DNS to open the DNS Record form.
  • Fill Name, Type, Value and TTL (next table).
  • Click Add, then repeat for the other two DKIM records. Or run vercel dns add for each (next section).
FieldWhat to enter for the DKIM recordWhy
Name<token1>._domainkey.mailVercel: the prefix or location of the record; for www.example.com the name is www. For a subdomain target it says to enter only support, not support.example.com.
TypeCNAMETXT for SPF and DMARC.
Value<token1>.dkim.amazonses.comThe hostname the CNAME points to.
TTL60 (default)Vercel's default is 60 seconds; advanced users can change it.
CommentAISend DKIM 1Optional. Vercel says it gives context on what the record is for.
Value (TXT)v=spf1 include:amazonses.com ~allName mail for SPF, _dmarc.mail for DMARC.

Type the host the way Vercel wants it

Vercel calls the host box Name, the CNAME target Value and the TXT text Value. Worked example for mail.acme.com, in Vercel's own words:

RecordTypeName to typeValue to type
DKIM 1CNAME<token1>._domainkey.mail<token1>.dkim.amazonses.com
DKIM 2CNAME<token2>._domainkey.mail<token2>.dkim.amazonses.com
DKIM 3CNAME<token3>._domainkey.mail<token3>.dkim.amazonses.com
SPF (optional)TXTmailv=spf1 include:amazonses.com ~all
DMARC (optional)TXT_dmarc.mailv=DMARC1; p=none; rua=mailto:dmarc@mail.acme.com

On a record that sits on the registered domain itself (acme.com, not mail.acme.com), Vercel wants: (leave Name blank; @ in the CLI). The calculator below does the same for your own domain.

Type the domain you added in AISend, for example mail.acme.com. Nothing leaves your browser.

What Vercel's own documentation says

The same records with the Vercel CLI

Vercel documents vercel dns add <domain> <name> <type> <value>, with the name as the prefix and '@' for the root. Put your three tokens into shell variables, so nothing in angle brackets reaches the shell: Source: Vercel Docs: Managing DNS Records, checked November 19, 2026.

# paste the three tokens from the AISend Domains page
T1=your-first-token
T2=your-second-token
T3=your-third-token

vercel dns add acme.com "$T1._domainkey.mail" CNAME "$T1.dkim.amazonses.com"
vercel dns add acme.com "$T2._domainkey.mail" CNAME "$T2.dkim.amazonses.com"
vercel dns add acme.com "$T3._domainkey.mail" CNAME "$T3.dkim.amazonses.com"

# optional
vercel dns add acme.com mail TXT "v=spf1 include:amazonses.com ~all"
vercel dns add acme.com _dmarc.mail TXT "v=DMARC1; p=none; rua=mailto:dmarc@mail.acme.com"

Verify in AISend

  • Open the AISend Domains page, find your domain and click Verify DNS Records.
  • Each record gets its own live status: "Found", "Not found yet", "Wrong value", "Proxied", "Wrong host", "Duplicate" and so on, with a plain hint on what to change.
  • When the three DKIM rows are found the domain is verified. SPF and DMARC stay optional.

Vercel says it can take up to 24 hours for DNS records to fully update and local caches to clear. Source: Vercel Docs: Managing DNS Records, checked November 19, 2026.

Check from your terminal

These commands show what the public DNS answers, which is what verification reads.

# paste your first token from the AISend Domains page
TOKEN1=your-first-token

# should print <token>.dkim.amazonses.com.
dig +short CNAME "$TOKEN1._domainkey.mail.acme.com"

# optional records
dig +short TXT mail.acme.com
dig +short TXT _dmarc.mail.acme.com

# where does the domain's DNS really live?
dig NS acme.com +short

# ask Vercel's nameserver directly, bypassing resolver caches
dig +short CNAME "$TOKEN1._domainkey.mail.acme.com" @ns1.vercel-dns.com

Prefer a page? The free SPF & DMARC checker looks up the same records for any domain, no sign-up.

Common failures at Vercel

What you seeLikely causeFix
dig CNAME <token1>._domainkey.mail.acme.com @ns1.vercel-dns.com answers, other resolvers do notVercel's nameserver has the record; resolvers hold the old answer.Wait for the previous record's TTL to expire, as Vercel's troubleshooting table says.
Two SPF records at mailThe name already had an SPF TXT record, and AISend's was added as a second one.Merge into one: v=spf1 include:... include:amazonses.com ~all, with a single all at the end.
CNAME rejected next to an existing recordA CNAME cannot sit beside another record with the same name.Our DKIM names are unique per token; remove the stale record on that exact name.
Name typed as <token1>._domainkey.mail.acme.comVercel's form wants the prefix only.Use <token1>._domainkey.mail.
dig NS acme.com returns NXDOMAINThe domain name is misspelled, was never registered, or has expired. In our count of pending domains on 2026-11-17, 11 of 19 did not exist in DNS.Fix the name in AISend or register the domain; no DNS record can verify a name that does not exist.
The nameservers are not the ones you editedRecords were added at a DNS host the domain does not use. Run dig NS acme.com +short. Vercel's own page tells you to edit records at whichever provider this returns; if it is not Vercel, use that provider's guide instead.Add the records at the provider the nameservers point to, or switch the nameservers to the one you edited.
Verified, but old mail now fails SPFA second SPF record on the same name; a name may carry only one.Merge into one v=spf1 record with a single all, or skip SPF; AISend does not require it.

The shared causes (zone typed twice, proxies, a second SPF record, a name that does not exist, records added at the wrong DNS host) come from our count of pending domains; the Vercel-specific rows come from its documentation, linked above.

Frequently asked questions

Can I add the AISend records in Vercel if my site is hosted there?

Only if the domain uses Vercel's nameservers. Vercel says that to apply and manage DNS records the domain needs to use its nameservers; hosting a site on Vercel does not move the DNS.

How do I check a Vercel DNS record without waiting for caches?

Query Vercel's nameserver directly: dig CNAME <token1>._domainkey.mail.acme.com +short @ns1.vercel-dns.com. Vercel documents this command for checking records independently of resolver caches.

What Name do I enter for the TXT record in the Vercel form?

For SPF on mail.acme.com, mail. For DMARC, _dmarc.mail. For a record on the root domain Vercel says to leave Name blank in the dashboard, or use '@' in the CLI; AISend recommends a subdomain so you do not need it.

Which of the records does AISend need before the domain verifies?

Only the three DKIM CNAME records. The SPF and DMARC TXT records are optional and do not block verification. A subdomain such as mail.acme.com is the safer first choice because it rarely already has an SPF record.

Why do the guide's tokens look like placeholders?

The three tokens are generated per domain and shown only in your AISend dashboard. We never invent them; copy each token from the Domains page into the host and into the value.

Sources

Ready to send from your own domain?

Creating an account is free, and a free account can send 10 test emails to its own verified address from onboarding@send.aisend.app. Sending to other people needs Pro, $14/month for 50,000 emails, and a verified domain.